PE100 SDR11
HDPE butt
fusion end cap is produced by injecting the original carbon black PE100
granular raw material into the molds under pressure. It is used to close the
end of the HDPE pipeline using butt welding or electrofusion coupler.
| d | basınç (bar) pressure (bar) | kg | L (mm) |
| 20 | pn16 | 0,010 | 44 |
| 25 | pn16 | 0,012 | 45 |
| 32 | pn16 | 0,015 | 44 |
| 40 | pn16 | 0,025 | 48 |
| 50 | pn16 | 0,051 | 57 |
| 63 | pn16 | 0,075 | 58 |
| 75 | pn16 | 0,124 | 63 |
| 90 | pn16 | 0,232 | 77 |
| 110 | pn16 | 0,389 | 90 |
| 125 | pn16 | 0,490 | 91 |
| 140 | pn16 | 0,612 | 85 |
| 160 | pn16 | 1,051 | 115 |
| 180 | pn16 | 1,232 | 110 |
| 200 | pn16 | 1,597 | 116 |
| 225 | pn16 | 2,195 | 125 |
| 250 | pn16 | 3,000 | 130 |
| 280 | pn16 | 4,200 | 139 |
| 315 | pn16 | 6,000 | 150 |